Access Economics 2009, The economic cost of spinal cord injury and traumatic brain injury in Australia, report prepared for Victorian Neurotrauma Initiative, Access Economics, Canberra, ACT

Akcelik, R & Besley, M 2003, ‘Operating cost, fuel consumption and emissions models in aaSIDRA and aaMOTION’, Conference of Australian Institutes of Transport Research (CAITR), University of South Australia, Adelaide, SA, 15 pp

Australian Bureau of Statistics 2013a, Labour force, Australia: table 12: labour force status by sex: states and territories, publication 6202.0, ABS, Canberra, ACT

Australian Bureau of Statistics 2013b, Average weekly earnings, Australia, publication 6302.0, ABS, Canberra, ACT

Australian Bureau of Statistics 2013c, Survey of motor vehicle use, 12 months ended 30 June 2012, publication 9208.0, ABS, Canberra, ACT

Australian Industrial Relations Commission 2013, Road Transport and Distribution Award. Canberra, ACT

Australian Taxation Office 2013, Fuel tax credits: changes from 1 July 2013, fact sheet NAT 7417107, ATO, Canberra, ACT

Austroads 1994, Review of Axle Spacing/Mass Schedule for General Access and Restricted Access Vehicles. Austroads Report AP-113/94, Austroads, Sydney, NSW

Austroads 1997, Value of travel time savings. Austroads Report AP-119. Austroads, Sydney, NSW

Austroads 2000, ‘Estimating RUC for urban road networks: upgrading the TRAMS model’, project RC92052, Austroads, Sydney, NSW

Austroads 2002, Development of an Austroads heavy vehicle nomenclature – discussion paper, Austroads Report AP-R174, Austroads, Sydney, NSW

Austroads 2004, Economic evaluation of road investment proposals: unit values for road user costs at June 2002, AP-R241-04, Austroads, Sydney, NSW

Austroads 2005a, Economic evaluation of road investment proposals: harmonisation of non-urban road user cost models, AP-R264-05, Austroads, Sydney, NSW

Austroads 2005b, Economic evaluation of road investment proposals, IR-96-05, Austroads, Sydney, NSW

Austroads 2006, Automatic vehicle classification by vehicle length, Austroads Report AP-T60-06, Austroads, Sydney, NSW

Austroads 2010a, Road safety engineering risk assessment: part 7: crash rates database, AP-T152-10, Austroads, Sydney, NSW

Austroads 2010b, Guide to road design: part 3: geometric design, 2nd edn, AGRD03-10, Austroads, Sydney, NSW

Austroads 2011a, Updating RUE unit values and methodologies, AP-R373-11, Austroads, Sydney, NSW

Austroads 2011b, Valuation of travel time reliability: a review of current practice, AP-R391-11,Austroads, Sydney, NSW

Austroads 2011c, Small travel time savings: treatment in project evaluations, AP-R392-11, Austroads, Sydney, NSW

Austroads 2012a, Guide to project evaluation: part 4: project evaluation data, AGPE04-12, Austroads, Sydney, NSW

Austroads 2012b, Update of vehicle/road relationships underpinning road user costs and externality costs, AP-T189-11, Austroads, Sydney, NSW

Austroads 2012c, Effectiveness of road safety engineering treatments, AP-R422-12, Austroads, Sydney, NSW

Austroads 2012d, Guide to pavement technology: part 2: pavement structural design, 3rd ed, AGPT02-12, Austroads, Sydney, NSW

Austroads 2013, Guide to Traffic Management, Part 3: Traffic studies and analysis. Austroads Report AGTM03/13, Austroads, Sydney, NSW

Austroads 2015, Social cost of road crashes in Australia: the case for willingness to pay (WTP) values for road safety, AP-R438-15, Austroads, Sydney, NSW

Batley, R, Mackie, P, Bates, J, Fowkes, T, Hess, S, de Jong, G, Wardman, M & Fosgerau, M 2010, Updating appraisal values for travel time savings: phase 1 study, report prepared for Department for Transport, Institute for Transport Studies (ITS), Leeds, UK

Bennett, CR & Greenwood, ID 2006, Modelling road user and environmental effects, Highway Development and Management Series vol. 7, World Road Association (PIARC), Paris

Biggs, DC 1988, ARFCOM: models for estimating the light to heavy vehicle fuel consumption, ARR 152, Australian Road Research Board, Vermont South, Vic

Both, G & Bayley, C 1976, Evaluation procedures for rural road and structure projects, Australian Road Research Board (ARRB) Conference, 8th, 1976, Perth, Australian Road Research Board, Vermont South, Vic, vol. 8, no. 6, pp. 6‒25, 52‒3.Lloyd 1988

Bowyer, D, Akcelik, R & Biggs, D 1985, Guide to fuel consumption analyses for urban traffic management, SR 32, Australian Road Research Board, Vermont South, Vic

Bureau of Transport Economics 2000, Road crash costs in Australia, BTE Report 102, Canberra

Bureau of Transport and Regional Economics 2010, Cost of road crashes 2006. BITRE Research Report 118. Canberra

Cox, J.B. and Arup Transportation Planning 1996, Models for predicting vehicle operating costs in urban areas, Austroads Project BS3.A.41, Contract Report 8748, Ove Arup and Partners, Melbourne, Vic

Department of Infrastructure, Transport, Regional Development and Local Government, 2009, Nation building program: black spot projects: notes on administration, DITRDLG, Canberra, ACT

Department of the Environment, 2014, National Inventory Report 2012, Volume 1, Australian Government Submission to the United Nations Framework Convention on Climate Change, Australian National Greenhouse Accounts, Canberra, April

EMISIA, 2014, COPERT Australia, EMISIA and the Queensland Department of Science, Information Technology, Innovation and the Arts (DSITIA), Queensland, Australia, viewed 3rd December 2014,

Hodges, J, Rolt, J and Jones, T 1975, The Kenya road transport cost study: research on road deterioration, laboratory report LR 673, Transport and Road Research Laboratory: Crowthorne

Jurewicz, C & Bennett, P 2008, ‘Casualty crash rates for Australian jurisdictions’, Australasian road safety research policing education conference, 2008, Adelaide, South Australia, Department for Transport, Energy and Infrastructure, Walkerville, South Australia, 24 pp

Linard, K, Martin, T, & Thoresen, T 1996, Optimisation Procedures for Pavement Life-Cycle Costing, National Road Transport Commission Technical Working Paper 23 (ARRB TR: Vermont South, Victoria, Australia)

Lloyd, B & Tsolakis, D 2000, ‘Estimating RUC for urban road networks’, contract report RC90252, ARRB Transport Research, Vermont South, Vic

Lloyd, B 2012, ‘Dissecting the basic fuel consumption equation into its components to improve adaptability to changing vehicle characteristics’, ARRB conference, 25th, Perth, Western Australia, ARRB Group, Vermont South, Vic, 10 pp

Lloyd, E & Thomas, G 1988, Economic Evaluation Procedures for Urban Road Projects, Perth, Advance Planning Section, Main Roads Department, WA

Michel, N, Hassan, R et al. 2008, FAMLIT Freight Axle Mass Investigation Tool, 23rd ARRB Conference, Adelaide, Australian Road Research Board, Vermont South

New Zealand Transport Agency 2013, Economic evaluation manual, NZTA, Wellington, NZ

OPUS International Consultants 1999, Review of VOC-pavement roughness relationships contained in Transfund’s project evaluation manual, Opus International Consultants, Wellington, New Zealand

Peters, E 2001, Austroads road user costs projects, Road System and Engineering Technology Forum, 2001, Brisbane, Queensland, Department of Main Roads, Road System and Engineering Group, Brisbane

Phedonos, J 2006, Review of Vehicle Operating Costs and Updating of VOC Coefficients for Use with IRMS, ARRB Contract Report, Improved Planning, Programming and Budgeting Procedures for Eastern Indonesia, Directorate General of Highways, Jakarta, Indonesia

Roads and Traffic Authority 2008, Economic valuation of safety benefits: serious injuries, final report, RTA, Sydney, NSW

Small, KA 2012, ‘Valuation of travel time’, Economics of Transportation, vol. 1, no. 1, DOI 10.1016/j.ecotra.2012.09.002, 40 pp

Stannard, EE & Wightman, D 2006, Analytical framework and model descriptions, Highway Development and Management Series vol. 4, World Road Association (PIARC), Paris

Tan, F, Evans, C & Thoresen, T, 2012, Review of vehicle operating cost and road roughness: Past, present and future. 25th ARRB Conference: Perth

Thoresen, T 2004, ‘Quantifying the road user cost implications of incremental load pricing for heavy freight vehicles’, contract report RC4189, ARRB Transport Research, Vermont South, Vic

Thoresen, T and Ronald, N 2002, Consistent input parameters for use in HDM-4 under Australian conditions: Road user costs. ARRB internal report for Austroads project RC2062, Vermont South, March.

Thoresen, T & Roper, R 1996, Review and enhancement of vehicle operating cost models: assessment of non urban evaluation models, ARR 279, ARRB Transport Research, Vermont South, Vic

Thoresen, T & Roper, R 1999, ‘HDM-4 model testing for selected Australian conditions: review of road user effects models calibration assessment study (HDM-4 Beta version 3.0)’, contract report RC90038-4, ARRB Transport Research, Vermont South, Vic

Transport for New South Wales 2013a, ‘Principles and guidelines for economic appraisal of transport investments and initiatives’, TfNSW, Sydney, NSW.

Transport for New South Wales 2013b, ‘Existing methods and models used to estimate vehicle operating costs for high productivity vehicles (HPVs)’, HPV Working Group working paper 1, TfNSW, Sydney, NSW

Transportation Research Board 2013, Development of tools for assessing wider economic benefits of transportation, TRB, Washington, DC, USA

Wardman, M, Batley, R, Laird, J, Mackie, P, Fowkes, T, Lyons, G, Bates, J & Eliasson, J 2013, Valuation of travel time savings for business travellers: main report, report prepared for Department for Transport, Institute for Transport Studies (ITS), Leeds, UK

Watanatada, T, Dhareshar, A & Rezende Lima, PRS 1987, Vehicle speeds and operating costs: models for road planning and management, John Hopkins University Press, Baltimore